8.25.2010

mast step steps

the White Oak mast step was bedded in with a thick mixture of cabosil and epoxy then given a nice 1 inch radius fillet.

with a little patience, it is possible to pull the edge fibers outward while pressing the triaxial fabric over the mast step so that one piece can be used

I decided to vacuum bag the entire mast step lamination in place so I've surrounded the work with vacuum tape and pre positioned the bag. 

After covering the mast step with two layers of 24 oz triaxial glass and epoxy, I then used a vacuum pump to insure that the mast step will be rock solid.

0 comments: