1.16.2012

Anchor roller


Here are the anchor roller plates being fitted with flanges that will allow the anchor roller unit to be attached to the under side of the bow beam.  In this photo, I have already formed one of the flanges to fit the mating curve and have yet to bend the the other one.  To promote maximum bond strength, I machined a surface texture onto the mating flange.  These flanges will then be welded to the anchor roller plates. Once complete, this unit will be bonded to the bow beam by wrapping the flanges with multiple layers of unidirectional glass and carbon fiber.  After that, I will most likely wake up in the middle of the night and apply additional wraps of epoxy and carbon fiber in my sleep.



anchor roller plates



Anchor roller mock up

Rather than using construction string for my anchor rode and old paint rollers to secure my anchor, I figure an upgrade is in order.


0 comments: