back to the cabin top[

Here's the final run of "B" (24 oz. glass) going down over what will be the interior top of the cabin. This photo shows my 10 step lamination technique.

1) lay foam over stringer mold
2) fair all glue joints
3) skim foam with a slurry of epoxy and micro balloons
4) roll wet coat of epoxy over foam using a 3" paint roller w/ 3/8" fur
5) lay glass over wet coat
6) wait until the glass soaks up from below
7) roll another wet coat over glass
8) lay peel ply over wet glass
9) wet top of peel ply with left over epoxy that is on the roller ( this makes it easier to work)
10) work excess epoxy from center to edges using bondo spreader.