Kevlar option

I chose to go with the optional 9.oz Kevlar sheathing on the hulls. This option begins by laying down 8 inch wide, 9 0z. unidirectional kevlar along the hull center line "keel". This is then covered with 9 oz. twill kevlar fabric sheathing from 48 inches aft of the mast bulkhead, forward to the stem and 8 inches above the waterline. Kevlar is very difficult to wet out so using slow hardener, lots of patience and peel ply over the big sticky mess is about all you can do.

Someday, maybe I'll feel better about myself after I beach this ship onto the only hidden rock on the sandy beach.....