Targa bar corners

To help with shaping, I used a sharpy pen to mark a center line guide curve on the ends of the foam

I stayed up many nights trying to come up with a brilliant way to create the 8 inch radius corners of the targa bar.  Although my method allowed me to create a nice transition, it required the cutting, gluing and shaping of over 20 pieces of corecell foam.  The end result turned out nice but this was mainly due to persistence not brilliance.  Sometimes, simple solutions are difficult to find.  The next step will be to laminate the exterior of both targa bar uprights then glass the entire assembly onto the stern of the boat.