The F-44SC has two steering stations. Two 32 in destroyer style wheels will turn on 1 in. diameter stainless steel shafts supported by bearings on both the inside and outside of the cabin bulkhead.
For the interior steering shaft bearing supports, I chose to laminate 6 layers of glass over 8 inch square pieces of 3/4 in marine plywood.
shaping the bulkhead mounted steering pedestals. As backing plates for the two steering shaft bearings, I used 1//4 in. aluminum.
vac bagging the steering pedestals in place. In the foreground, I have pre cut and shaped triaxial glass to fit the steering mount.
port side
starboard side
port
starboard
For the interior steering shaft bearing supports, I chose to laminate 6 layers of glass over 8 inch square pieces of 3/4 in marine plywood.
starboard side interior bearing plate
port side interior bearing plate
Posts
1 comments:
Hey Allen,
Here is a link out to some of the interior photos I promised months ago.
https://www.dropbox.com/sh/x4m5urkw4doks46/12Qhe6nP9Y
Let me know if you want more or any others.
Kurt
Post a Comment